Search result
Alarm
Audio from the set input source can be played back at a specified time. Use this to set playback for the same time every day, or set alarm playback on a certain day of the week.
Alarm 1
|
On: |
Enables Alarm 1. |
|
Off: |
Disables Alarm 1. |
Alarm 2
|
On: |
Enables Alarm 2. |
|
Off: |
Disables Alarm 2. |
Edit Alarm
Used to edit Alarm 1 or Alarm 2.
Use Cursor Up/Down buttons to select “Alarm 1” or “Alarm 2”, then press ENTER.
Use Cursor Up/Down buttons to setting for the alarm start time, then press ENTER.
Use Cursor Up/Down buttons to change to desired setting, then press ENTER.
|
Never: |
Alarm is not repeated. (single time only) |
|
Everyday: |
Alarm is repeated every day. |
|
Weekdays: |
Alarm is repeated on weekdays (Mon. to Fri.) only. |
|
Weekends: |
Alarm is repeated on weekends (Sat., Sun.) only. |
|
Custom: |
Used to set alarm on/off settings individually for each day of the week. Alarm is repeated only for days set to on. |
Use Cursor Up/Down buttons to select the input source, then press ENTER.
|
CD / Tuner / HDMI / Optical / Phono / Line |
When “Tuner” is selected, select a preset number.
Use Cursor Up/Down buttons to select the volume level “00 – 100”, then press ENTER.
Displays the alarm settings.
When the “Speakers” - “Amplifier Mode” setting is “Standard (A, B, or A+B)”, You can set the volume for Speaker A and Speaker B independently.
Check the displayed alarm settings and press ENTER.
The display shows “Complete!!” and the setting is completed.