Search result
Adjusting the tone and balance
Adjusting the tone
Press OPTION.
The option menu screen is displayed.
Use Cursor Up/Down buttons to select “Tone”, then press ENTER.
Use Cursor Up/Down buttons to select “Bass” or “Treble”, then press ENTER.
If you are using an F.C.B.S. connection, a screen for selecting the F.C.B.S. ID (“Leader”, “Member 1”, “Member 2” or “Member 3”) will appear after step 3. Use Cursor Up/Down buttons to select the ID of the device you want to set, then press ENTER.
Use Cursor Up/Down buttons to adjust the bass or treble volume.
|
Bass: |
–10 dB – +10 dB (Default: 0 dB) |
|
Treble: |
–10 dB – +10 dB (Default: 0 dB) |
When the input source is set to “Power Amp Balanced” or “Power Amp Unbalanced”, the tone adjustment function does not work.
When the source direct mode is turned on, the tone adjustment function does not work.
Adjusting the volume balance
Press OPTION.
The option menu screen is displayed on the display.
Use Cursor Up/Down buttons to select “Trim”, then press ENTER.
Use Cursor Left/Right buttons to select “Left” or “Right”.
If you are using an F.C.B.S. connection, a screen for selecting the F.C.B.S. ID (“Leader”, “Member 1”, “Member 2” or “Member 3”) will appear after step 3. Use Cursor Up/Down buttons to select the ID of the device you want to set, then press ENTER.
Use Cursor Up/Down buttons to adjust the volume balance.
|
Left: |
-∞ (minimum), -19.0 - 0 (maximum) (Default: 0) |
|
Right: |
-∞ (minimum), -19.0 - 0 (maximum) (Default: 0) |
When the input source is set to “Power Amp Balanced” or “Power Amp Unbalanced”, the volume balance adjustment function does not work.
When the source direct mode is turned on, the volume balance adjustment function does not work.
When the source direct mode is turned on, the “Trim” setting is set to 0 (maximum).