Overview

Accessories

Inserting the batteries
Operating range of the remote control unit
Part names and functions

Front/Top panel
Rear panel
Remote control unit

Connections

Connections
Connecting speakers

Speaker A/B connection
Bi-wiring connection
Connecting a playback device
Connecting a recording device
Connecting a pre-amplifier or power amplifier
Connecting multiple MODEL 10 units (F.C.B.S. connection)

Preparation for F.C.B.S. connection
Stereo complete bi-amp connection
Connection for 5.1 Multi-channel Playback
Connecting an external control device

FLASHER IR IN jack
REMOTE CONTROL connectors
Connecting the power cord

Playback

Playback

Turning the power on
Switching the power to standby
Selecting the input source
Adjusting the volume
Turning off the sound temporarily (Muting)
Adjusting the tone and balance
Playback in source direct mode
Switching the display’s brightness
Turning the front panel illumination, interior illumination and display on/off
Using this unit as a power amplifier
Recording

Settings

Menu map

Menu operation
Level Meter
Illumination
Volume Scale
Phono
Auto-Standby
Setting remote control codes

Setting remote control codes for the remote control
Setting remote control codes for the main unit
Disabling SACD player/streaming preamplifier operating mode on remote control

Disabling SACD player operating mode
Disabling streaming preamplifier operating mode
Setting the device to be operated by the volume buttons on the remote control

Setting the device to be operated by the volume buttons in SACD player operating mode
Setting the device to be operated by the volume buttons in streaming preamplifier operating mode

Tips

Tips
Troubleshooting

Power does not turn on / Power is turned off
Operations cannot be performed through the remote control unit
Display on this unit shows nothing
No sound comes out
Desired sound does not come out
Sound is interrupted or noise occurs
Error messages

Appendix

Explanation of terms
Specifications
Dimensions / Weight
Index
PDF Download

Recording

Audio signals input into this unit can be output to an external recording device. When recording audio from a playback device connected to this unit, audio can be recorded with the playback device still connected to this unit.

Press Power Button to turn the power on.
Use INPUT Button_INPUT up Mz Button_INPUT down Mz to switch to the input source from which you want to record.

The selected input source appears on the display.

Recording starts.

For information on operations, see the owner’s manual of the recording device.

When this unit is in standby mode, no audio output from LINE OUT connectors.

back to top