Setting remote control codes

Remote control codes are set between this unit and the included remote control. You can select one of the three types of remote control codes, and the remote control can be used to control the unit when the same remote control code is used. If three of these units are used in the same location, all three units can be controlled simultaneously using one remote control in the default settings. By setting individual remote control codes between a unit and the remote control, the remote control can be used to control only the unit that has the same remote control code.

Be sure to check the operation of each unit after setting the remote control codes.

The default setting is “AMP 1”.

Set the remote control cord to “AMP 1” when controlling this unit from a Marantz SACD player, streaming preampifier or other device connected using a remote connection cable to this unit.link

Remote control unit illustration

Ope Remote RC004PMND

back to top