Search result
Front/Center/Surround/Surround Back
Set the correct audio output terminals for your speaker system.
Configuration
Select whether or not each speaker exists. For Surround Back speakers, select the number of speakers to be used.
[Front/Center/Surround]
|
Yes |
The selected speakers will be used. |
|
No: |
The selected speakers will not be used. |
[Surround Back]
|
2 spkrs |
Two Surround Back speakers will be used. |
|
1 spkr: |
Only one Surround Back speaker will be used. When you select this setting, connect to the SURROUND BACK L terminal. |
|
No: |
Surround Back speakers will not be used. |
“Front” is fixed as “Yes” as it is required for playback.
When “Surround” is set to “No”, “Surround Back” settings are automatically set to “No”.
“Surround Back” can be set when Amp Assign is set to “7.1ch”.
Surround Back speakers cannot be used when using “Height” speakers.
Connection
Select the output terminals for audio from the speakers.
|
Spkr + Pre-out |
Speaker and pre-out outputs are active. |
|
Pre-out Only: |
Pre-out outputs are active. Speaker outputs are disconnected for enhanced audio quality using only the pre-out terminals. |
When “Amp Assign” is set to “Preamplifier”, the “Connection” setting of all speakers will be fixed as “Pre-out Only”.