Search result
Wi-Fi Setup
Connect to a wireless LAN (Wi-Fi) router.
The router can be connected in the following ways. Select the connection method to suit your home environment.
Scan Networks
Select the network you wish to connect to from the list of possible networks shown on the TV screen.
Select the network you wish to connect to from the list of wireless networks.
Select “Rescan” if the network cannot be found.
Enter your password and select “OK”.
Use iOS Device
Use your iOS device (iPhone/iPod/iPad) to connect to the network. By connecting your iOS device to this unit using Wi-Fi, the unit can be automatically connected to the same network as your device.
Select “Use iOS Device” on the TV screen.
Check that your iOS device is connected to the wireless LAN (Wi-Fi) router and select “Marantz CINEMA 50” from “SET UP NEW AIRPLAY SPEAKER...” at the bottom of the Wi-Fi configuration screen of your iOS device.
Tap “Next” on the screen of the iOS device.
The iOS device firmware version needs to support iOS 10.0.2 or later.
WPS Router
Use a WPS-compatible router to connect using the push button method.
Select “Push Button” on the TV screen.
Switch to the WPS mode by pressing the WPS button of the router you wish to connect to.
The time for pressing the button varies depending on the router.
Select “Connect” on the TV screen within 2 minutes.
Manual
Enter the name (SSID) and password of the network you wish to connect to.
Set the following items.
|
SSID: |
Input the name of the wireless network (SSID). |
|
Security: |
Select the encryption method according to the encryption setting of the access point you are using. |
|
Password: |
Input the password. |
Select “Connect” at the end of the setting.
The Default key of this unit is fixed at “1”. Set Default key of the router to “1” to use.