Search result
Displaying your desired video during audio playback (Video Select)
This unit can display video from a different source on TV during audio playback. You can set this for each input source.
Supported input sources:
CD∗ / Tuner / HEOS Music / Phono
This cannot be set when HDMI connector is assigned.
Press OPTION.
An option menu screen is displayed.
When the input source is “HEOS Music”, an option menu for online music is displayed. Select “AVR Options…”, then press ENTER.
Use cursor Up/Down to select “Video Select”, then press ENTER.
The “Video Select” screen is displayed.
Use cursor Left/Right to select the Video Select mode.
|
Off |
Disable Video Select mode. |
|
On: |
Enable Video Select mode. |
If you selected “On” in step 3, press cursor Down and select “Source”.
Use cursor Left/Right to select the input source for video you want to play back, then press ENTER.
|
Last |
Plays the video from the last input source that was played. |
|
CBL/SAT / |
Plays the video from the selected input source. ∗ |
You can select the input source to which the HDMI terminal is assigned.
“Video Select” settings are stored for each input source.