Search result
Rear panel
Bluetooth/wireless LAN antenna connectors
Used to connect the included external antennas for Bluetooth/wireless connectivity when connecting to a network via wireless LAN, or when connecting to a handheld device via Bluetooth. link
FLASHER IN jack
Used when using a control BOX or other such control devices to control this unit.
Digital audio connectors (DIGITAL AUDIO)
Used to connect devices equipped with digital audio connectors.
USB port ( )
This is used to connect USB storages (such as USB memory devices). link
NETWORK connector
Used to connect to a LAN cable when connecting to a wired LAN network. link
USB port (POWER SUPPLY)
Can be used to power streaming media players, etc.
Use a device’s supplied AC adapter when a power supply of 5 V/1.5 A or more is required.
To play content from a USB memory device, connect to the USB port .
HDMI connectors
Used to connect devices equipped with HDMI connectors.
SIGNAL GND terminal
Used to connect a ground wire for the turntable. link
DAB/FM antenna terminal (ANTENNA)
Used to connect a DAB/FM antenna. link
Analog audio connectors (AUDIO)
Used to connect devices equipped with analog audio connectors.
PRE OUT connectors
Used to connect a subwoofer with built-in amplifier or power amplifier.
REMOTE CONTROL jacks
Used to connect infrared receivers/transmitters in order to operate this unit and external devices from a different room. link
Speaker terminals (SPEAKERS)
Used to connect speakers.
AC inlet (AC IN)
Used to connect the power cord. link
Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause permanent damage to the unit.