Search result
4K/8K Signal Format
Set the format of 4K and 8K signal to be played back by this unit when the TV or playback device connected to this unit is HDMI 4K or 8K signal compatible.
4K/8K Signal Format
Sets the signal format options for devices connected to each input on this unit.
|
Standard: |
Select if your TV and the source device support 4K 60Hz 4:2:0 8 bit video signals. |
|
Enhanced |
Select if your TV, the source device, and cables support high quality 4K 60Hz 4:4:4 8 bit, 4:2:2 or 4:2:0 10 bit video signals. |
|
8K Enhanced: |
Select if your TV, the source device, and cables support high quality 8K 60Hz or 4K 120Hz video signals. |
Relation between the “4K/8K Signal Format” setting and supported resolutions 
|
Support Resolution |
Color Space |
Pixel Depth |
4K/8K Signal Format |
||
|---|---|---|---|---|---|
|
Standard |
Enhanced |
8K Enhanced |
|||
|
4K 24Hz, |
RGB / |
8 bit |
|
|
|
|
10,12 bit |
– |
|
|
||
|
YCbCr 4:2:2 |
12 bit |
|
|
|
|
|
4K 60Hz, |
YCbCr 4:2:0 |
8 bit |
|
|
|
|
10,12 bit |
– |
|
|
||
|
RGB / |
8 bit |
– |
|
|
|
|
10,12 bit |
– |
– |
|
||
|
YCbCr 4:2:2 |
12 bit |
– |
|
|
|
|
4K 120Hz, |
YCbCr 4:2:0 |
8,10,12 bit |
– |
– |
|
|
RGB / |
8,10 bit |
– |
– |
|
|
|
YCbCr 4:2:2 |
12 bit |
– |
– |
|
|
|
8K 24Hz, |
YCbCr 4:2:0 |
8,10,12 bit |
– |
– |
|
|
RGB / |
8,10 bit |
– |
– |
|
|
|
YCbCr 4:2:2 |
12 bit |
– |
– |
|
|
|
8K 60Hz, |
YCbCr 4:2:0 |
8, 10 bit |
– |
– |
|
When setting this to “Enhanced”, we recommend using a “Premium High Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that has an “HDMI Premium Certified Cable” label attached to the product package.
When setting this to “8K Enhanced”, we recommend using a certified “Ultra High Speed HDMI cable”.
When this setting is “8K Enhanced”, configure the television or playback device settings to match this setting.
When this setting is “8K Enhanced”, video may not be output correctly depending on the connected playback device or HDMI cable. In this case, change this setting to “Enhanced” or “Standard”.
“Custom” is displayed for the setting item if our service engineers or custom installers has configured the HDMI signal format for this unit.
“4K/8K Signal Format” can also be set by the following procedure. However, the menu screen is not displayed. Watch the display while configuring the setting.
Switch to the HDMI input source you want to set.
When this unit is turned on, press and hold 
on the main unit until “SPECIAL MODE” appears on the display.
on the main unit until “SPECIAL MODE” appears on the display.Turn the INPUT selector knob on the main unit to select “5Special Settings”, then press .
.“4K/8K Format <Enh>” appears on the display.
Turn the SPEAKERS switching knob on the main unit to select the 4K/8K Signal Format setting.
Press on the main unit to confirm the settings.
on the main unit to confirm the settings.