Stopping Bluetooth receiver and transmitter functions reduces a source of noise that affects sound quality, enabling higher sound quality playback.

(Default) :

Enables the Bluetooth function.


Disables the Bluetooth function.


Enables or disables the Bluetooth headphones transmitter.

Perform these settings when you are listening to audio playback of this unit with Bluetooth headphones.


Enables the Bluetooth headphones transmitter feature.


Disables the Bluetooth headphones transmitter feature.

Output Mode

Selects the audio output method.

HP + Speakers
(Default) :

Audio is output to Bluetooth headphones and speakers.


Audio is output to Bluetooth headphones only.


Available devices are displayed in the list once you start pairing mode on the Bluetooth headphones you want to connect. Select your Bluetooth headphones from the list to pair them.

This unit can only pair with one Bluetooth headphone at a time. However, up to 8 Bluetooth headphones can be registered. Switch between registered devices from “Devices” in the “Bluetooth” setup menu.

To remove a saved Bluetooth device from the list, use the shirosankaku shirosankaku-Reverse buttons to select it, press the OPTION button, and then press the ENTER button when “Forget This Device” is displayed.

A2DP profile-compatible Bluetooth speakers can be connected following the same steps used to connect Bluetooth headphones.


Bluetooth transmitter and Bluetooth receiver function cannot be used at the same time. Bluetooth transmitter function is not available when listening to music on a Bluetooth device.

Even when “Headphone” is set to “On”, press Bluetooth on the remote control to select the “Bluetooth” source and enable the Bluetooth receiver function.
To listen to music stored on Bluetooth devices such as smartphones on this unit, press Bluetooth on the remote control to switch the input source to Bluetooth, then reconnect the Bluetooth device.

Menu settings for Bluetooth headphones transmitter are not available when this unit is grouped within the HEOS app.

Bluetooth headphones cannot be connected if a HEOS built-in device is playing an input source from this unit.

back to top