Overview

Connections

Connecting speakers

Connecting the speaker cables

Connecting speakers

Connecting the subwoofer

Connecting a playback device

Connecting a recording device

Connecting to a device with digital audio connectors

Connecting a USB flash drive to the USB port

Connecting to a home network (LAN)

Wired LAN

Wireless LAN

Connecting a pre-amplifier

Connecting devices with remote control connectors

Performing operations by RC on this unit without visual contact

Remotely connecting Marantz audio devices

Connecting the power cord

Playback

Basic operation

Turning the power on

Switching the power to standby

Selecting the input source

Adjusting the volume

Turning off the sound temporarily (Muting)

Playing CDs

Listening to music on a Bluetooth device

Pairing with other Bluetooth devices

Reconnecting to this unit from a Bluetooth device

Listening to audio on Bluetooth headphones

Reconnecting to a Bluetooth headphones

Disconnecting Bluetooth headphones

Playing digital input

Getting the HEOS App

Setting up the HEOS App for the first time with a HEOS built-in device

Adding the registration of HEOS built-in devices in the HEOS App

HEOS Account

Playing from streaming music services

Listening to the same music in multiple rooms

Listening to Internet Radio

Playing music stored on your mobile

Playing back files stored on a PC or NAS

Playing music from a USB flash drive

AirPlay function

Playing songs from your iPhone, iPod touch or iPad

Playing iTunes music with this unit

Play a song from your iPhone, iPod touch or iPad on multiple synced devices (AirPlay 2)

Spotify Connect function

Playing Spotify music with this unit

Convenience functions

Adjusting the tone and balance

Playback in source direct mode

Switching the display’s brightness

Using the sleep timer

Recording

Using this unit as a power amplifier

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Sound is interrupted or noise occurs

Desired sound does not come out

AirPlay cannot be played back

USB flash drives cannot be played back

Bluetooth cannot be played back

The Internet radio cannot be played back

Music files on PC or NAS cannot be played back (Music server)

Various online services cannot be played

Cannot connect to a wireless LAN network

Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)

The input source switches to “HDMI ARC”, “Optical” or “Coaxial”

The HDMI control function does not work

Update/upgrade error messages

Restoring the firmware to the factory defaults

Appendix

Playing back a USB flash drives

D/A converter

Playing back a Bluetooth device

Playing back files stored on a PC and NAS

Playing back Internet Radio

Last function memory

About HDMI

Explanation of terms

Trademark information

Remote control unit

The remote control provided with this unit can control a Marantz CD player.

CD player operationslink

Operating this unit

To operate this unit, press REMOTE MODE AMP button to switch the remote control operating mode to this unit.

Remote control signal transmitter

This transmits signals from the remote control unit. link

Input source select buttons

These select the input source. link

System buttons

These perform playback related operations.

Play/Pause button ( Button_PlayPause Mz )

Press this button to pause during playback. If pressed while paused or stopped, resumes playback from the last track played.

Forward-skip button ( Button_Skip Right Mz )

Press this button during playback to play the next track.

Reverse-skip button ( Button_Skip Left Mz )

Press this button during playback to restart the current track or play the previous track.

Stop button ( Button_Square White Mz )

Press this button to stop during playback.

Depending on the input source and online service, the operation cannot be performed.

CONNECT button

Used for Wi-Fi setup. link

Input source select button (INPUT)

This switches input sources. link

ENTER button

This determines the selection.

Cursor buttons

These select items.

BACK button

Returns to the previous item.

Power on/standby button (AMP )

This turns the power on/off (standby). link

Remote mode select button
(REMOTE MODE AMP)

Switches the remote control operating mode to this unit.

VOLUME buttons ( )

These adjust the volume level. link

OPTION button

This displays the option menu on the display.

An option menu is not displayed for some input sources.

Mute button ( )

This mutes the output audio. link

SETUP button

The setting menu is displayed on the display. link

SLEEP button

This sets the sleep timer. link

DIMMER button

Adjust the display brightness of this unit. link

CD player operations

A Marantz CD player can be operated.

To operate CD player, press REMOTE MODE CD button to switch the remote control to the CD player operation mode.

Power on/standby button (CD )

Remote mode select button
(REMOTE MODE CD)

System buttons

Input source select button (INPUT)

Information button (INFO)

PROGRAM button

ENTER button

Cursor buttons

Number buttons (0 – 9)

RANDOM button ( )

REPEAT button ( )

Remote control unit