Search result
2ch Playback
Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.
Setting
Select the method for setting the speakers used in the 2-channel direct and stereo playback modes.
|
Auto |
The settings in “Speakers” are applied. link |
|
Manual: |
Set the speakers for 2-channel playback. Make the following settings. |
Crossover
Set the maximum frequency of the bass signal output from each channel to the subwoofer.
|
Full Range: |
Select “Full Range” to set the speaker to play full-range audio. |
|
40 Hz / 60 Hz / 80 Hz / |
Selects the crossover point to send the low frequency sound to the subwoofer. |
Subwoofer
Set the presence of a subwoofer.
|
Yes |
Use a subwoofer. |
|
No: |
Select when a subwoofer is not connected. |
When “Speaker Layout” - “Subwoofers” in the menu is set to “No”, No is automatically set. link
Subwoofer Output
Selects which low frequency signals are sent to the subwoofer outputs.
|
LFE |
When “2ch Playback” - “Crossover” is set to “Full Range”, only LFE signals are output from the subwoofer. Also, when “2ch Playback” - “Crossover” is set to other than “Full Range”, the front channel low range signals are added to the LFE signals and output from the subwoofer. |
|
LFE + Main: |
The front channel low range signal is added to the LFE signal output from the subwoofer. |
This can be set when “2ch Playback” - “Subwoofer” is set to “Yes”.
Bass Extraction LPF
Selects the low-pass filter point for the full-range speaker to copy the low frequency signal to subwoofer.
|
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / 180 Hz / 200 Hz / 250 Hz (Default: 80 Hz) |
This can be set when “2ch Playback” - “Crossover” is set to “Full Range”, and “2ch Playback” - “Subwoofer” is set to “Yes”.
LFE Distribution
Adjusts the amount of LFE signal sent to the full-range front speakers.
|
Off |
Front Speakers do not play LFE signals. |
|
–20 dB – 0 dB |
Adjusts the amount of LFE signal sent to the front speakers |
This can be set when “2ch Playback” - “Crossover” is set to “Full Range”, and “2ch Playback” - “Subwoofer” is set to “Yes”.
Distance FL / Distance FR
Set distance from main listening position to speaker.
The unit is “msec” when using “Dirac Live”.
|
0.0 ft – 59.1 ft (Default: 11.8 ft) / |
Set the difference in the distance between the speakers to less than 19.7 ft (6.00 m).
[When using Dirac Live]
|
0.0 ms – 20.0 ms |
Level FL / Level FR
Adjust the level of each channel.
|
-12.0 dB – +12.0 dB (Default: 0.0 dB) |