Search result
Speaker Preset
Two speaker settings can be saved to suit the environments where you use your speakers.
For example, in some cases the characteristics of a room change depending on whether a screen is used. By saving two different presets, you can easily switch between the equalizer and speaker settings for each situation that were measured with an Audyssey® Setup.
Presets also make it easy to switch between the sound effects of an Audyssey Setup and those of Dirac Live.
If you want to use a preset, select the preset you want to use and then configure settings such as Audyssey® Setup, Dirac Live Room Correction∗ and speaker settings to save those settings to the selected preset.
When exporting measurement results from Dirac Live Software to this unit for the first time, the settings are automatically saved in “Speaker Preset 2”.
|
Speaker Preset 1 |
Saves the settings to Preset 1. |
|
Speaker Preset 2: |
Saves the settings to Preset 2. |
The following settings are saved to presets.
“Speaker Layout” settings
“Distances” settings
“Levels” settings
“Crossovers” settings
“Subwoofer Output” settings
“Low Pass Filter” settings
“Distribution” settings
“2ch Playback” settings
“Front Speaker” settings
“MultEQ® XT32” data
“Dirac Live” data
“Graphic EQ” data
This setting also be configured using “Speaker Preset” in the option menu. link