Search result
Speaker Config.
Select whether or not speakers are present, playback capacity for low bass frequencies and speaker size.
When speakers for which you assigned Height1 in “Amp Assign” are set to “None”, “None” is automatically set for Height2.
Front
Set the front speaker size.
|
Large |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small: |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
When “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
When “Front” is set to “Small”, you cannot set speakers other than “Front” to “Large”.
Center
Set the presence and size of the center speaker.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when a center speaker is not connected. |
Subwoofer
Set the presence of a subwoofer.
|
2 spkrs: |
Use two subwoofers. |
|
1 spkr |
Use only one subwoofer. |
|
None: |
Select when a subwoofer is not connected. |
When “Subwoofer” is set to “None” and you set “Front” to “Small”, “Subwoofer” is automatically set to “1 spkr”.
Surround
Set the presence and size of the surround speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the surround speakers are not connected. |
When “Surround” is set to “None”, “Surr. Back”, “Front Wide”, “Surround Dolby” and “Back Dolby” are automatically set to “None”.
Surr. Back
Set the presence, size and number of surround back speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the surround back speakers are not connected. |
|
|
|
|
2 spkrs |
Use two surround back speakers. |
|
1 spkr: |
Use only one surround back speaker. Connect to the L terminal to SURROUND BACK when this setting is selected. |
When “Surr. Back” is set to “None” or “1 spkr”, “Back Dolby” is automatically set to “None”.
Front Wide
Set the presence and size of the front wide speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the front wide speakers are not connected. |
Front Height
Set the presence and size of the front height speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the front height speakers are not connected. |
Front Dolby
Set the presence and size of the front Dolby speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the front Dolby speakers are not connected. |
Top Front
Set the presence and size of the top front speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the top front speakers are not connected. |
Top Middle
Set the presence and size of the top middle speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the top middle speakers are not connected. |
Surround Dolby
Set the presence and size of the surround Dolby speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the surround Dolby speakers are not connected. |
Top Rear
Set the presence and size of the top rear speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the top rear speakers are not connected. |
Rear Height
Set the presence and size of the rear height speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the rear height speakers are not connected. |
Back Dolby
Set the presence and size of the back Dolby speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the back Dolby speakers are not connected. |
When speakers for which you assigned Height1 in “Amp Assign” are set to “None”, “None” is automatically set for Height2.
Upgrade (Auro-3D)
Surround Height
Set the presence and size of the surround height speakers.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the surround height speakers are not connected. |
When “Front Height” is set to “None”, “Surround Height” is automatically set to “None”.
Upgrade (Auro-3D)
Top Surround
Set the presence and size of the top surround speaker.
|
Large: |
Use a large speaker that can adequately play back very low bass frequencies. |
|
Small |
Use a small speaker that has inadequate playback capacity for very low bass frequencies. |
|
None: |
Select when the top surround speaker is not connected. |
When “Surround Height” or “Rear Height” is set to “None”, “Top Surround” is automatically set to “None”.