Picture Adjust

Picture quality can be adjusted.

Can be set when the “Video Conversion” setting is “On”. link

Can be set when “HDMI”, “COMP” or “VIDEO” is assigned for each input source. link

“Contrast”, “Brightness”, “Saturation”, “Noise Reduction” and “Enhancer” can be set when “Picture Mode” is set to “Custom”. link

“Picture Adjust” settings are stored for each input source.

“Picture Adjust” cannot be set when 4K signals are input.

Picture Mode

Select the desired picture mode according to the video content and your viewing environment.


The standard mode suited for most living room viewing environments.


A mode suited for watching movies in a dark room such as a theater room.


A mode that makes graphic images for games, etc. brighter and more vivid.


A mode suited for low bit rate video sources.

ISF Day:

A mode suited for watching movies in a bright room during the day.

ISF Night:

A mode suited for watching movies in a dark room at night.


Adjusts the picture quality manually.


No picture quality adjustment is done with this unit.

The two special adjustment modes, ISF Day and ISF Night, should be used by a certified technician to adjust the color calibration to match the installation conditions.
We recommend that the settings and adjustments be carried out by an ISF-certified technician.

These settings can also be configured using “Picture Mode” in the option menu. link

The default settings are as follows.

For “Online Music” and “iPod/USB” input sources: Streaming

For input sources other than “Online Music” and “iPod/USB”: Off


Adjust picture contrast.

-50 – +50 (Default : 0)


Adjust picture brightness.

-50 – +50 (Default : 0)


Adjust picture chroma level (color saturation).

-50 – +50 (Default : 0)

Noise Reduction

Reduce overall video noise.

Low / Medium / High / Off (Default : Off)


Emphasize picture sharpness.

0 – +12 (Default : 0)

back to top