Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each speaker.
Set the unit of distance.
Set the minimum variable width of the distance.
0.1 m / 0.01 m (Default: 0.1 m)
1 ft / 0.1 ft
Set the distance
0.00 m – 18.00 m / 0.0 ft – 60.0 ft
Front L / Front R / F. Height L / F. Height R / F. Wide L / F. Wide R / Center /
Front Dolby L / Front Dolby R / Subwoofer 1 / Subwoofer 2: 3.60 m (12.0 ft)
Speakers other than the above: 3.00 m (10.0 ft)
Set the difference in the distance between the speakers to less than 6.00 m (20.0 ft).
Dolby Speaker Setup
Set the distance between the Dolby Atmos Enabled speaker and the ceiling.
0.90 m - 3.30 m / 3.0 ft - 11.0 ft
This can be set when “Front Dolby”, “Surround Dolby” or “Back Dolby” is set to “Large” or “Small” in “Speaker Config.”.
The “Distances” settings are returned to the default settings.