
RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) :	50 W x 2 (8 Ω/ohms load) 65 W x 2 (4 Ω/ohms load)
Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) :	0.08 %
Frequency response (CD, 1 W, 8 Ω/ohms load) :	5 Hz – 100 kHz ±3 dB
Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) :	100 and over
Input sensitivity/impedance:	PHONO (MM): 1.6 mV / 47 kΩ/kohms CD, LINE 1, LINE 2: 155 mV/15 kΩ/kohms
Output voltage (PREAMP OUT):	L/R: 1.3 V SUBWOOFER: 200 mV
Maximum allowable PHONO input level (1 kHz) MM :	80 mV
RIAA deviation (20 Hz – 20 kHz) :	±1.0 dB
S/N (IHF-A, 8 Ω/ohms load) :	PHONO (MM): 85 dB (5 mV input) CD, LINE 1, LINE 2: 110 dB (rated output)
Tone control:	BASS (50 Hz): ±10 dB TREBLE (15 kHz): ±10 dB

Bluetooth section


Supported Audio Formats:	aptX Adaptive / aptX HD / aptX / AAC / SBC - RX aptX Adaptive / aptX HD / aptX / SBC - TX
Supported Audio Applications:	Classic Audio (AVRCP) - RX Classic Audio - TX
Transmit Power:	Power Class 1
Typical Range:	30 m in line of sight ∗1

The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.

General


Operating temperature:	+5 ℃ - +35 ℃
Power supply:	AC 230 V, 50/60 Hz
Power consumption:	150 W
Power consumption in standby modes:

Standby modes	Setting items in the menu			Power consumption
Standby modes	TV Auto-Play link	HDMI Power Off Control link	Bluetooth link	Power consumption
Normal standby	Off	Off	Off	0.3 W
Optical standby	Optical	Off	Off	0.5 W
Coaxial standby	Coaxial	Off	Off	0.5 W
CEC standby	HDMI ARC	All	Off	0.5 W
Bluetooth connect	Off	Off	On	1.0 W
All standby	HDMI ARC	All	On	1.0 W

Item	Numerical value
Battery type:	Zinc-Carbon (for remote control unit)

For the purpose of improvement, the specifications and design are subject to change without notice.