Overview

Inserting the batteries

Operating range of the remote control unit

Part names and functions

Remote control unit

Connections

Connecting speakers

Connecting speakers

Connecting the subwoofer

Connecting a playback device

Connecting a TV

Connecting this unit to the HDMI ARC terminal on a TV

Connecting this unit to the Optical or Coaxial terminal on a TV

Connecting to a device with digital audio output connectors

Connecting a power amplifier

Connecting devices with remote control connectors

Performing operations by RC on this unit without visual contact

Remotely connecting Marantz audio devices

Connecting the power cord

Playback

Basic operation

Turning the power on

Switching the power to standby

Selecting the input source

Adjusting the volume

Turning off the sound temporarily (Muting)

Listening to music on a Bluetooth device

Listening to music on a Bluetooth device

Pairing with other Bluetooth devices

Reconnecting to this unit from a Bluetooth device

Listening to audio on Bluetooth headphones

Listening to audio on Bluetooth headphones

Adjusting the volume of Bluetooth headphones

Confirming the device and codec of the connected Bluetooth headphones

Reconnecting to a Bluetooth headphones

Disconnecting Bluetooth headphones

Playing digital input

Convenience functions

Adjusting the tone and balance

Playback in source direct mode

Switching the filter characteristics

Switching the display’s brightness

Settings

HDMI Power Off Control

Setting remote control codes

Setting remote control codes for the remote control

Setting remote control codes for the main unit

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Desired sound does not come out

Sound is interrupted or noise occurs

Bluetooth cannot be played back

Audio from digital devices cannot be played back (HDMI ARC, Coaxial, Optical)

The input source switches to “HDMI”, “OPTICAL” or “COAXIAL”

The HDMI control function does not work

It doesn't switch between FILTER 1/2

Appendix

Playing back a Bluetooth device

Explanation of terms

Trademark information

Dimensions / Weight

Safety Instructions Download

TV Auto-Play

Set the “TV Auto-Play” function, which automatically switches the input source and plays the TV audio when a TV audio signal is input to this unit. Configure it according to the terminal used to connect to the TV.


HDMI ARC / Optical / Coaxial / Off (Default: HDMI ARC)

When an audio signal from the selected input source is detected while the unit is in standby, its power will automatically turn on and the TV audio will play.

Depending on your TV, the “TV Auto-Play” function may not work.