Playback

Rear panel

Name Rear small 1 CD50n

Bluetooth/wireless LAN antenna connectors

Used to connect the included external antennas for Bluetooth/wireless connectivity when connecting to a network via wireless LAN, or when connecting to a handheld device via Bluetooth. link

Place the external antennas for Bluetooth/wireless connectivity evenly over the screw terminal of rear.
Turn clockwise until the antennas is fully connected.
Rotate the antenna upwards for best reception.
Pict AntennaAngle CD50n

USB port ( Icon USB )

This is used to connect USB storages (such as USB flash drives).
link

NETWORK connector

Used to connect to a LAN cable when connecting to a wired LAN network. link

HDMI connector (HDMI ARC)

Used to connect an ARC function-compatible TV. link

DIGITAL AUDIO OUT connectors

Used to connect an amplifier or D/A converter that has a digital input connectors. link

DIGITAL AUDIO IN connectors

Used to connect a TV with an optical or coaxial digital terminal. link

Used to connect devices equipped with digital audio output connectors. link

Used to connect a computer. link

AUDIO OUT connectors

Used to connect devices equipped with analog audio inputs connectors or an external power amplifier. link

Name Rear small 2 CD50n

FLASHER IN jack

Used to connect a control box, etc. link

RS-232C connector

Used to connect home automation controller devices fitted with RS-232C connectors. Consult the owner’s manual of the home automation controller for more information about serial control of this unit.

Perform the operation below beforehand.

Turn on the power of this unit.
Turn off the power of this unit from the external controller.
Check that the unit is in the standby mode.

REMOTE CONTROL connectors

Used to connect to a Marantz audio device that is compatible with the remote control function. link

EXTERNAL/INTERNAL switch

Turn this switch to “EXTERNAL” to operate the unit by pointing the remote control at the amplifier connected to this unit using the remote control connection. link

CONNECT button

Used for Wi-Fi setup. link

AC inlet (AC IN)

Used to connect the power cord. link

back to top