Playback

Changing the settings

Set the items below to the settings you want to register.

The following settings from sanwacirnumw_1 to sanwacirnumw_12 can be memorized for MAIN ZONE, and settings sanwacirnumw_1 and sanwacirnumw_2 can be memorized for ZONE2 and ZONE3.

Input source link
Volume link
Sound mode link
Audyssey (Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume®, Audyssey LFC™) link
“All Zone Stereo”link
“Speaker Preset”link

Press and hold SMART SELECT while a radio station is being received is being played back with any of the following sources, the current radio station is memorized.

Internet Radio Station / Spotify

Press MAIN, Z2 or Z3 to select the operating zone with the remote control.

The indicator for the selected zone is lit.

Press and hold the desired SMART SELECT until “Smart Flower Mark Memory”, “Z2 Smart Flower Mark Memory” or “Z3 Smart Flower Mark Memory” appears on the display.

The current settings will be memorized.

Flower Mark is displayed the number for the SMART SELECT button you pressed.

Changing setting items in Smart Select

You can change the MAIN ZONE Smart Select names displayed on the TV screen or this unit’s display and saved setting items.

See “Smart Select” in the menu for details on how to make these changes. link

TV Audio sharing settings

You can enjoy the same content as the MAIN ZONE in ZONE2 or ZONE3 while maintaining surround playback of the content from TV or other playback devices in the MAIN ZONE with the original audio format such as Dolby Atmos.
By saving the following settings in advance to Smart Select, you can easily call up the playback environments to be used in the MAIN ZONE, ZONE2 and ZONE3 with this function.

Select the input source to play back in the MAIN ZONE.
Press ZONE2 ON/OFF or ZONE3 ON/OFF on the main unit to turn on the power of the zone where you want to play the same content as the MAIN ZONE.
Press ZONE2 SOURCE or ZONE3 SOURCE on the main unit to switch the input source of ZONE2 or ZONE3 to “Source”.

If “Source” is selected as the input source of ZONE2 or ZONE3, the input source is changed to mirror that of the MAIN ZONE.

Press and hold the desired SMART SELECT until “Smart Select* Memory” appears on the display.

back to top