Playback

4K/8K Signal Format

Set the format of 4K and 8K signal to be played back by this unit when the TV or playback device connected to this unit is HDMI 4K or 8K signal compatible.

4K/8K Signal Format

Sets the signal format options for devices connected to each input on this unit.

Standard:

Select if your TV and the source device support 4K 60Hz 4:2:0 8 bit video signals.

Enhanced
(Default):

Select if your TV, the source device, and cables support high quality 4K 60Hz 4:4:4 8 bit, 4:2:2 or 4:2:0 10 bit video signals.

8K Enhanced:

Select if your TV, the source device, and cables support high quality 8K 60Hz or 4K 120Hz video signals.

Bracket Open Relation between the “4K/8K Signal Format” setting and supported resolutions Bracket Close

Support Resolution

Color Space

Pixel Depth

4K/8K Signal Format

Standard

Enhanced

8K Enhanced

4K 24Hz,
4K 30Hz,
4K 25Hz

RGB /
YCbCr 4:4:4

8 bit

check_mark

check_mark

check_mark

10,12 bit

check_mark

check_mark

YCbCr 4:2:2

12 bit

check_mark

check_mark

check_mark

4K 60Hz,
4K 50Hz

YCbCr 4:2:0

8 bit

check_mark

check_mark

check_mark

10,12 bit

check_mark

check_mark

RGB /
YCbCr 4:4:4

8 bit

check_mark

check_mark

10,12 bit

check_mark

YCbCr 4:2:2

12 bit

check_mark

check_mark

4K 120Hz,
4K 100Hz

YCbCr 4:2:0

8,10,12 bit

check_mark

RGB /
YCbCr 4:4:4

8,10 bit

check_mark

YCbCr 4:2:2

12 bit

check_mark

8K 24Hz,
8K 30Hz,
8K 25Hz

YCbCr 4:2:0

8,10,12 bit

check_mark

RGB /
YCbCr 4:4:4

8,10 bit

check_mark

YCbCr 4:2:2

12 bit

check_mark

8K 60Hz,
8K 50Hz

YCbCr 4:2:0

8, 10 bit

check_mark

When setting this to “Enhanced”, we recommend using a “Premium High Speed HDMI Cable” or “Premium High Speed HDMI Cable with Ethernet” that has an “HDMI Premium Certified Cable” label attached to the product package.

When setting this to “8K Enhanced”, we recommend using a certified “Ultra High Speed HDMI cable”.

When this setting is “8K Enhanced”, configure the television or playback device settings to match this setting.

When this setting is “8K Enhanced”, video may not be output correctly depending on the connected playback device or HDMI cable. In this case, change this setting to “Enhanced” or “Standard”.

“Custom” is displayed for the setting item if our service engineers or custom installers has configured the HDMI signal format for this unit.

“4K/8K Signal Format” can also be set by the following procedure. However, the menu screen is not displayed. Watch the display while configuring the setting.

Switch to the HDMI input source you want to set.
Press and hold the main unit’s STATUS and ZONE3 SOURCE at the same time for at least 3 seconds.

Flower Mark Video Format < PAL>” appears on the display.

Press cursor Down on the main unit.

“4K/8K Format <Enhanced>” appears on the display.

Use cursor Left or cursor Right on the main unit to select the 4K/8K Signal Format.
Press the main unit’s ENTER to complete the setting.

back to top