Playback

Changing the strength of Tactile Transducer according to the input source (Tactile Transducer)

Adjusts the volume of the tactile transducer output.

Press OPTION.

An option menu screen is displayed.

When the input source is “HEOS Music”, an option menu for online music is displayed. Select “AVP Options…”, then press ENTER.

Use cursor Up/Down to select “Tactile Transducer”, then press ENTER.

The “Tactile Transducer” screen is displayed.

Use cursor Left/Right to set the tactile transducer function to on/off.

On
(Default):

Enable tactile Transducer.

Off:

Disable tactile Transducer.

If you selected “On” in step 3, press cursor Down and adjust the “Level”.
Use cursor Left/Right to adjust the tone, then press ENTER.

-12.0 dB – +12.0 dB (Default : 0.0 dB)

“Tactile Transducer” settings are stored for each input source.

This cannot be set when the “Speakers” - “Manual Setup” - “Advanced” - “Tactile Transducer” - “Tactile Transducer” is set to “Disabled”.

back to top