Playback

Connecting a playback device

This unit is equipped with HDMI video input connectors and three types of audio input connectors (HDMI, digital audio and audio).

Select input connectors on this unit according to the connectors equipped on the device you want to connect.

If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.

In the HDMI connection, audio and video signals can be transmitted through a single HDMI cable.

Connect devices to this unit as indicated by the input sources printed on the audio/video input connectors of this unit.

The source that is assigned to the HDMI IN, DIGITAL AUDIO IN and AUDIO IN connectors can be changed. See “Input Assign” on how to change the input source assigned to the input connectors. link

To play back audio signals that are input to this unit on a TV connected via HDMI, set in the menu “HDMI Audio Out” to “TV”. link

To enjoy content that is copyright protected by HDCP 2.2 or HDCP 2.3, use a playback device and TV compatible with HDCP 2.2 or HDCP 2.3.

Connecting the BALANCED XLR IN connector

This unit is equipped with BALANCED XLR IN connectors. Use these connectors if your device has an XLR connector as an audio output connector.

When using BALANCED XLR IN connectors, assign “XLR” for “Input Assign” – “ANALOG”. link
By default, these connectors are disabled.

Bracket Open AV 10 BALANCED XLR IN connector PIN arrangement Bracket Close

Pict XLR pin-2
GND (Ground)
HOT (+)
COLD (–)

back to top