Search result
Crossovers
Set in accordance with the lower limit frequency of the base frequencies that can be played back through each speaker. See the speaker manual for information concerning speaker crossover frequency.
Set the crossover frequency
|
Full Range: |
Select “Full Range” to set the speaker to play full-range audio. |
|
40 Hz / 60 Hz / 80 Hz / |
Selects the crossover point to send the low frequency sound to the subwoofer. |
The default crossover frequency is “80 Hz”, which will work best with the widest variety of speakers. We recommend setting to a higher frequency that the crossover frequency when small speakers are used. For example, set to “250 Hz” when the frequency range of the speakers is 250 Hz – 20 kHz.
Sound below the crossover frequency is cut off from the output of the speakers. This cut off bass frequency is output from the subwoofer or front speakers.
The “Front” is automatically set to “Full Range” when “Subwoofers” is set to “No” in the “Speaker Layout”.
Each speaker can be set to “Full Range” only when the Front is set to “Full Range”.
The audio settings in “IMAX Audio Settings” are applied during IMAX playback. link