Adding wired HEOS Built-in devices
Just connect the HEOS Built-in devices to your home network using an Ethernet cable and the HEOS Built-in device will appear on your HEOS app as a new room in the Rooms screen.
At your convenience, you can assign a name to the HEOS Built-in device to indicate which room you have it placed in.
Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores (CAT-5 or greater recommended).
The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise.
Do not connect a NETWORK connector directly to the LAN port/Ethernet connector on your computer.