Overview

Inserting the batteries

Operating range of the remote control unit

Part names and functions

Remote control unit

Connections

Connecting speakers

Connecting the speaker cables

Connecting speakers

Connecting the subwoofer

Connecting a playback device

Connecting to a device with digital audio connectors

Connecting a USB flash drive to the USB port

Connecting to a home network (LAN)

Connecting a power amplifier

Connecting devices with remote control connectors

Performing operations by RC on this unit without visual contact

Remotely connecting Marantz audio devices

Connecting the power cord

Playback

Basic operation

Turning the power on

Switching the power to standby

Selecting the input source

Adjusting the volume

Turning off the sound temporarily (Muting)

Listening to music on a Bluetooth device

Listening to music on a Bluetooth device

Pairing with other Bluetooth devices

Reconnecting to this unit from a Bluetooth device

Listening to audio on Bluetooth headphones

Listening to audio on Bluetooth headphones

Reconnecting to a Bluetooth headphones

Disconnecting Bluetooth headphones

Playing digital input

Getting the HEOS app

Setting up the HEOS app for the first time with a HEOS built-in device

Adding the registration of HEOS built-in devices in the HEOS app

Playing from streaming music services

Listening to the same music in multiple rooms

Listening to Internet Radio

Playing music stored on your mobile

Playing back files stored on a PC or NAS

Playing music from a USB flash drive

AirPlay function

Playing songs from your iPhone, iPod touch, iPad or Mac

Playing songs from Windows PC

Play a song from your iPhone, iPod touch, iPad or Mac on multiple synced devices (AirPlay 2)

Spotify Connect function

Playing Spotify music with this unit

Convenience functions

Adjusting the tone and balance

Playback in source direct mode

Playing back HEOS Favorites

Switching the display’s brightness

Using the sleep timer

Settings

HDMI Power Off Control

Network & USB-A

Network Control

Connecting by using the WPS button on the router

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Sound is interrupted or noise occurs

Desired sound does not come out

AirPlay cannot be played back

USB flash drives cannot be played back

Bluetooth cannot be played back

The Internet radio cannot be played back

Music files on PC or NAS cannot be played back (Music server)

Various online services cannot be played

Cannot connect to a wireless LAN network

Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)

The input source switches to “HDMI”, “Optical” or “Coaxial”

The HDMI control function does not work

Update/upgrade error messages

Factory Restore

Appendix

Playing back a USB flash drives

Playing back a Bluetooth device

Playing back files stored on a PC and NAS

Playing back Internet Radio

Last function memory

Explanation of terms

Trademark information

Dimensions / Weight

Playing digital input

Remote control unit illustration

Ope Digi In RC006PM

Prepare for playback.

Check the connection, then turn on this units. (Connecting to a device with digital audio connectorslink)

Press HDMI, COAXIAL or OPTICAL to switch the input source to “HDMI”, “COAXIAL” or “OPTICAL”.

Play the component connected to this unit.

If the sampling frequency cannot be detected, “Unlocked” will be displayed.

“Unsupported” is displayed when audio signals that are not supported by this unit are input.

When “TV Input” is set in the menu, this unit automatically turns on when the TV connected to the unit is turned on, and the input source switches to “HDMI”, “COAXIAL” or “OPTICAL”. link

If you connect your TV via the Optical or Coaxial connection, this unit cannot be put to standby when you turn off your TV. If you want to automatically put this device on standby, set “Auto-Standby” in the settings menu. link

NOTE

Do not input non-PCM signals, such as Dolby Digital, DTS and AAC. This causes noise and could damage the speakers.

Only the PCM 2-channel setting can be used to play sound from a TV via the ARC function. Set "PCM 2ch" as the audio format in the TV settings.

Specifications of supported audio formats

See Digital inputlink.

HDMI control function

Connect this unit to a TV that supports the HDMI control function with an HDMI cable and enable the HDMI control setting on the TV to perform basic operations on this unit (changing the input source, turning the power on and off, adjusting the volume) with the remote control of the TV.

Refer to About HDMIlink for more information about the HDMI control function.