Overview

Inserting the batteries

Operating range of the remote control unit

Part names and functions

Remote control unit

Connections

Connecting speakers

Connecting the speaker cables

Connecting speakers

Connecting the subwoofer

Connecting a playback device

Connecting to a device with digital audio connectors

Connecting a USB flash drive to the USB port

Connecting to a home network (LAN)

Connecting a power amplifier

Connecting devices with remote control connectors

Performing operations by RC on this unit without visual contact

Remotely connecting Marantz audio devices

Connecting the power cord

Playback

Basic operation

Turning the power on

Switching the power to standby

Selecting the input source

Adjusting the volume

Turning off the sound temporarily (Muting)

Listening to music on a Bluetooth device

Listening to music on a Bluetooth device

Pairing with other Bluetooth devices

Reconnecting to this unit from a Bluetooth device

Listening to audio on Bluetooth headphones

Listening to audio on Bluetooth headphones

Reconnecting to a Bluetooth headphones

Disconnecting Bluetooth headphones

Playing digital input

Getting the HEOS app

Setting up the HEOS app for the first time with a HEOS built-in device

Adding the registration of HEOS built-in devices in the HEOS app

Playing from streaming music services

Listening to the same music in multiple rooms

Listening to Internet Radio

Playing music stored on your mobile

Playing back files stored on a PC or NAS

Playing music from a USB flash drive

AirPlay function

Playing songs from your iPhone, iPod touch, iPad or Mac

Playing songs from Windows PC

Play a song from your iPhone, iPod touch, iPad or Mac on multiple synced devices (AirPlay 2)

Spotify Connect function

Playing Spotify music with this unit

Convenience functions

Adjusting the tone and balance

Playback in source direct mode

Playing back HEOS Favorites

Switching the display’s brightness

Using the sleep timer

Settings

HDMI Power Off Control

Network & USB-A

Network Control

Connecting by using the WPS button on the router

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Sound is interrupted or noise occurs

Desired sound does not come out

AirPlay cannot be played back

USB flash drives cannot be played back

Bluetooth cannot be played back

The Internet radio cannot be played back

Music files on PC or NAS cannot be played back (Music server)

Various online services cannot be played

Cannot connect to a wireless LAN network

Audio from digital devices cannot be played back (HDMI ARC/Coaxial/Optical)

The input source switches to “HDMI”, “Optical” or “Coaxial”

The HDMI control function does not work

Update/upgrade error messages

Factory Restore

Appendix

Playing back a USB flash drives

Playing back a Bluetooth device

Playing back files stored on a PC and NAS

Playing back Internet Radio

Last function memory

Explanation of terms

Trademark information

Dimensions / Weight

Connecting the speaker cables

Carefully check the left (L) and right (R) channels and + (red) and - (white) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly.

Peel off about 3/8 inch (10 mm) of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it.

Conn spCable1

Turn the speaker terminal counterclockwise to loosen it.

Conn spCable2 PM10

Insert the speaker cable’s core wire to the hilt into the speaker terminal.

Conn spCable3 PM10

Turn the speaker terminal clockwise to tighten it.

Conn spCable4 PM10

Spade lug connector

When using a banana plug
Tighten the speaker terminal firmly before inserting the banana plug.