Overview

Accessories

Inserting the batteries
Operating range of the remote control unit
Part names and functions

Front panel
Rear panel
Remote control unit

Connections

Connections
Connecting speakers

Speaker A/B connection
Bi-wiring connection
Subwoofer connection
Connecting a playback device
Connecting a recording device
Connecting a pre-amplifier or power amplifier
Connecting devices with remote control connectors

Performing operations by RC on this unit without visual contact
Remotely connecting Marantz audio devices
Connecting the power cord

Playback

Playback

Turning the power on
Switching the power to standby
Selecting the speakers for audio output
Selecting the input source
Adjusting the volume
Turning off the sound temporarily (Muting)
Adjusting the tone and balance
Playback in source direct mode
Playing CDs
Using this unit as a power amplifier
Recording

Settings

Setting the display’s brightness
Setting the Auto Standby mode
Setting remote control codes

Setting remote control codes for the remote control
Setting remote control codes for the main unit

Tips

Tips
Troubleshooting

Power does not turn on / Power is turned off
Operations cannot be performed through the remote control unit
Display on this unit shows nothing
No sound comes out
Desired sound does not come out
Sound is interrupted or noise occurs

Appendix

Explanation of terms
Specifications
Dimensions / Weight
Index
PDF Download

Power does not turn on / Power is turned off

Power is not turned on.

Check whether the power plug is correctly inserted into the power outlet. link

This unit is in standby mode. Press the Power Button button on the unit or the AMP Power Button button on the remote control. link

Power automatically turns off.

The Auto Standby mode is on. When approx. 15 minutes pass with no audio input and no operations on the unit, this unit automatically enters the standby mode. To turn off the Auto Standby mode, press the AMP Power Button button for 5 seconds or longer. link

When this unit and a Marantz audio device compatible with the power synchronization function are connected using a remote connection cable, the power of this unit turns off (standby) in synchronization with the power off operation of the device connected to this unit. link

The power turns off and the protection circuit indicator shows one long blink and two short blinks in orange.

Stop playback on the playback device, and then turn the power off and on again.

If the problem is not solved by turning the power off and on again, this unit’s amplifier circuit has failed. Unplug the power cord and contact our customer service center.

The power turns off and the protection circuit indicator shows one long blink and three short blinks in orange.

This unit’s power circuit has failed. Unplug the power cord and contact our customer service center.

The power turns off and the protection circuit indicator shows one long blink and four short blinks in orange.

The protection circuit has been activated due to a rise in temperature within this unit. Turn the power off, wait about an hour until this unit cools down sufficiently, and then turn the power on again.

Please re-install this unit in a place having good ventilation.

Stop playback on the playback device, and then turn the power off and on again.

The power turns off and the protection circuit indicator shows one long blink and five short blinks in orange.

Check the speaker connections. The protection circuit may have been activated because speaker cable core wires came in contact with each other or a core wire was disconnected from the connector and came in contact with the rear panel of this unit. After unplugging the power cord, take corrective action such as firmly re-twisting the core wire or taking care of the connector, and then reconnect the wire. link

Stop playback on the playback device, and then turn the power off and on again.

If the problem is not solved by turning the power off and on again, this unit’s amplifier circuit or power circuit has failed. Unplug the power cord and contact our customer service center.

back to top