Search result
Specifications
|
RMS Power output (20 Hz – 20 kHz simultaneous drive of both channels) : |
70 W x 2 (8 Ω/ohms load) |
|
100 W x 2 (4 Ω/ohms load) |
|
|
Total harmonic distortion (20 Hz – 20 kHz simultaneous drive of both channels, 8 Ω/ohms load) : |
0.02 % |
|
Frequency response (CD, 1 W, 8 Ω/ohms load) : |
5 Hz – 100 kHz ±3 dB |
|
Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : |
100 and over |
|
Input sensitivity/impedance: |
PHONO (MM): 1.4 mV / 47 kΩ/kohms |
|
Output voltage: |
PRE OUT: 1.5 V |
|
Maximum allowable PHONO input level (1 kHz) MM : |
80 mV |
|
RIAA deviation (20 Hz – 20 kHz) : |
±0.5 dB |
|
S/N (IHF-A, 8 Ω/ohms load) : |
PHONO (MM): 87 dB (5 mV input) |
|
Tone Control : |
BASS (50 Hz): ±10 dB |
|
Operating temperature: |
41 °F - 95 °F (5 °C - 35 °C) |
|
Power supply : |
AC 120 V, 60 Hz |
|
Power consumption : |
220 W |
|
Power consumption in standby mode : |
0.3 W |
For the purpose of improvement, the specifications and design are subject to change without notice.