When “Auto-Standby” is set to “On”, and no operations are made in the stopped state for the set amount of time, this unit automatically enters standby mode.

For the input source “From iPod” only, when no operation is performed for eight hours, this unit automatically enters the standby mode.

1min / 5min /
15min / Other
(Default : 15min):

When “Other” is selected, the “Auto-Standby” time can be set within the range of 1 - 99 minutes. Select the value using shirosankaku shirosankaku-Reverse and then press ENTER to enter the setting value.


The unit does not go into standby automatically.

back to top