Setting items		Description	Page
Alarm		Sets the timer playback.	link
Clock		Sets the current time.	link
Clock Mode		The clock is constantly displayed.	link
Volume Limit		Make a setting for maximum volume.	link
Speaker Response		Set the output frequency characteristics.	link
Language		Sets the language for display the menu.	link
Auto-Standby		Sets the unit power to standby when the unit is not in use.	link
Usage Data		Selects whether or not to send anonymous usage data to Marantz.	link
Firmware		Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications.	link
	Update	Update the firmware of this unit.	link
	Notifications	Set the Update, Upgrade and Alerts notification on/off.	link
	Add New Feature	Display new features that can be downloaded to this unit and perform an upgrade.	link
Reset		Resetting factory settings.	link

Network

Setting items			Description	Page
Network Information			Displays various information about the network.	link
Network Control			Performs the ON/OFF settings for the network function when in standby mode.	link
Friendly Name			Edits a name displayed on the Internet.	link
Wi-Fi			Enables/disables the Wi-Fi function.	link
Bluetooth			Enables/disables the Bluetooth function.	link
Settings			Performs the settings for a wired or wireless LAN.	link
	Wired Setup		Performs the settings for a wired LAN.	link
		DHCP (On) or DHCP (Off)	Performs the DHCP setting.	link
		IP Address∗	Performs the IP address setting.	link
		Subnet Mask∗	Performs the subnet mask setting.	link
		Gateway∗	Performs the gateway setting.	link
		Primary DNS∗	Performs the primary DNS setting.	link
		Secondary DNS∗	Performs the Secondary DNS setting.	link
		Proxy	Performs the proxy setting.	link
		Test Connection	Performs the wired LAN connection.	–
	Wi-Fi Setup Method		Performs the wireless LAN connection setting.	link
		Auto-Scan	Selects and sets the wireless connections from the access point list.	link
		Share Wi-Fi setting from an iOS device	Sets the wireless connection using an iOS device. (iOS version 7 or later)	link
		WPS (Wi-Fi Protected Setup)	Sets the wireless connection using WPS (Wi-Fi Protected Setup).	link
		Web Browser Setup	Sets the wireless connection using web browser.	link
		Manual	Sets the wireless connection manually.	link

Displayed when the “DHCP” setting is “Off”. link