Audio section

Audio amplifier

Rated output:

2-channel driving
50 W + 50 W (6 Ω/ohms, 1 kHz, THD+N 0.7 %)

Dynamic power:

60 W + 60 W (6 Ω/ohms, 1 kHz, THD+N 10 %)

Output terminals:

Speaker: 4-16 Ω/ohms (impedance)
Compatible with headphones/stereo headphones

Input sensitivity/impedance:

Analog In: 200 mV/22 kΩ/kohms

Total harmonic distortion (1 kHz, 5 W, 6 Ω/ohms):

Analog In: 0.1 %

S/N ratio (10 W, 6 Ω/ohms, IHF-A):

Analog In : 90 dB

Tone control:

Dynamic Bass Boost : +8 dB (100 Hz)
Bass : ±10 dB (100 Hz)
Treble : ±10 dB (10 kHz)

Frequency response:

Analog In : 5 Hz – 40 kHz (±3dB)

Wireless LAN section

Network type (wireless LAN standard):

Conforming to IEEE 802.11b
Conforming to IEEE 802.11g
Conforming to IEEE 802.11n
(Wi-Fi® compliant)∗1


WEP 64 bit, WEP 128 bit



Radio frequency:

2.4 GHz

No. of channels:

1 – 13 ch

The Wi-Fi® CERTIFIED Logo and the Wi-Fi CERTIFIED On-Product Logo are registered trademarks of the Wi-Fi Alliance.

Bluetooth section

Communications system:

Bluetooth Version 2.1 + EDR (Enhanced Data Rate)

Transmission power:

Maximum 2.5 mW (Class 2)

Maximum communication range:

Approx. 10 m in line of sight∗2

Frequency band:

2.4 GHz band

Modulation scheme:

FHSS (Frequency-Hopping Spread Spectrum)

Supported profiles:

A2DP (Advanced Audio Distribution Profile) 1.2

AVRCP (Audio Video Remote Control Profile) 1.4

Corresponding codec:


Transmission range (A2DP):

20 Hz - 20,000 Hz

The actual communication range varies depending on the influence of such factors as obstructions between devices, electromagnetic waves from microwave ovens, static electricity, cordless phones, reception sensitivity, antenna performance, operating system, application software etc.


Clock type:

Power line frequency synchronized method (Within ±60 seconds per month)


Once alarm/Everyday alarm: One system each


Sleep timer: Max. 90 minutes


Power supply:

AC 220 - 230 V, 50/60 Hz

Power consumption:

50 W

Power consumption in standby mode :

0.3 W

Power consumption in “Clock Mode” – “On” mode:

1 W

Power consumption in “Network Control” – “On” mode:

3 W

For purposes of improvement, specifications and design are subject to change without notice.

back to top