Operating with the HDMI control (CEC) function

Turn the HDMI CONTROL switch on the side panel of this unit ON.

Turn on the power of all source devices (such as game consoles) connected to this unit with HDMI cables, the AV receiver/AV amplifier, and the TV.

Enable the HDMI control (CEC) function for all devices.

For source devices that have settings to link to other devices and turn them on when the source device power is turned on, enable those settings. Refer to the manual for each device for more information about the settings.

Turn the power of the TV to standby, and then confirm that the power of this unit, the source devices, and the AV receiver/AV amplifier also turn to standby.

If the power is turned off for all source devices connected to this unit, the HDMI input indicators of this unit are lit in red.

Turn on the power of the source device you want to use, and then confirm that the power of this unit, the AV receiver/AV amplifier, and the TV turn on, and that the HDMI input switches correctly.

The indicator for the selected HDMI input is lit in blue.

If the source device has an auto standby function, it is recommended to enable the auto standby function so that the power turns off automatically when not in use.

Depending on the specifications of the source device or TV that is connected, some functions may not be available.