Connection
Choose whether to connect the home network to a wireless LAN or a wired LAN.
When connecting to the network using wired LAN, select “Wired (Ethernet)” after connecting a LAN cable,
When connecting to the network using wireless LAN, select “Wireless (Wi-Fi)” and configure the “Wi-Fi Setup”.
Connect Using
Select the method for connecting to the home network (LAN).
|
Wired (Ethernet): |
Use a LAN cable to connect to a network. |
|
Wireless (Wi-Fi): |
Use the wireless LAN (Wi-Fi) function to connect to a network. |
You can disable the Wi-Fi function of this unit by configuring the following settings.
Press and hold the main unit’s ZONE2 SOURCE and STATUS at the same time for at least 3 seconds.
“V.Format: <NTSC>” appears on the display.
Use the main unit’s DIMMER to display “Wired LAN <Unlock>”.
Use the main unit’s ZONE2 SOURCE or INTERNET RADIO to select “<Lock>”.
Press the main unit’s STATUS to complete the setting.