This unit has UNBALANCED RCA connectors and BALANCED XLR connectors. Select the appropriate connectors for the preamplifier you will use and change the setting of the RCA or XLR selector on this unit. If the preamplifier has both types of connectors, either type can be used.

Bracket Open XLR connector PIN arrangement Bracket Close

GND (Ground)

HOT (Hot)

COLD (Cold)

The PIN arrangement in this unit uses the European method.

In the USA method, sanwacirnumw_2 is COLD, and sanwacirnumw_3 is HOT.

When connecting a device that utilizes the USA type of PIN arrangement, replace the sanwacirnumw_2 and sanwacirnumw_3 plugs on one side of the balanced cable.

NOTE

Do not short the HOT and GND or COLD and GND for use.

Remove the power plug of this unit from the outlet before connecting the preamplifier. Turn off the power of the device being connected as well.