Overview

Accessories

Inserting the batteries
Operating range of the remote control unit
Part names and functions

Front panel
Rear panel
Remote control unit

Connections

Connections
Connecting an amplifier
Connecting to a device with digital audio input connectors
Connecting to a device with digital audio output connectors
Connecting a PC or Mac
Connecting a USB flash drive to the USB port
Connecting an external control device

FLASHER IR IN jack
REMOTE CONTROL connectors
Connecting the power cord

Playback

Basic operation

Turning the power on
Switching the power to standby
Selecting the input source
Switching the display’s brightness
Turning the illumination and display on/off
Playing CDs/Super Audio CDs

Playing CDs and Super Audio CDs
Setting the top priority playback layer for Super Audio CDs
Playing Data CDs and Data DVDs

Playing files
Playing a USB flash drive

Playing files stored on USB flash drives
Using as a D/A converter

Connecting and playing back from a computer (USB-DAC)
Connecting and playing back from a digital device (Coaxial/Optical 1/Optical 2)

Settings

Menu map

Menu operation
Audio

Filter
Dither
Noise Shaper
Digital Out
HP Amplifier Gain
Resume Play
General

Illumination
Auto-Standby
Disabling amplifier/streaming preamplifier operating mode on remote control

Disabling amplifier operating mode
Disabling streaming preamplifier operating mode
Setting the device to be operated by the volume buttons on the remote control

Setting the device to be operated by the volume buttons in SACD player operating mode

Tips

Tips
Troubleshooting

Power does not turn on / Power is turned off
Operations cannot be performed through the remote control unit
Display on this unit shows nothing
No sound comes out
Sound is interrupted or noise occurs
Desired sound does not come out
USB flash drives cannot be played back
Cannot playback Discs
There is a delay before the disc tray starts to open
Music files on PC or Mac cannot be played back (USB-DAC)
Audio from digital devices cannot be played back (Coaxial/Optical)

Appendix

Playing back Discs
Playing back a USB flash drives
Playback order of music files
About discs and files
Cautions on using media

Loading discs
How to handle media
Cleaning discs
Digital input
Explanation of terms
Specifications
Dimensions / Weight
Index
PDF Download

Switching the display’s brightness

The display brightness can be adjusted from 100 % to Off (0 %) in steps of 5 %. Switching the display off reduces a source of noise that affects sound quality, enabling higher sound quality playback.

Press DIMMER.

The dimmer menu screen is displayed on the display.

Use Cursor Up/Down buttons to adjust the brightness of the display.

You can also adjust the brightness by pressing DIMMER.

The display brightness is set to 100 % by default.

If buttons are operated when the display is off, information is temporarily displayed at 100 %.

The display brightness setting is synchronized with the “Illumination” - “Display” setting in the settings menu. link

DIMMER does not work when LIGHTING is pressed and turned off.

back to top