
STEREO (Default):	Plays back the 2-channel area of the Super Audio CD.
MULTI:	Plays back the multi-channel area of the Super Audio CD. The analog output of this unit outputs a down-mixed 2-channel signal.
CD:	Plays back the CD layer of the Super Audio CD.

If this operation is not performed, reading begins automatically based on the top priority playback layer setting. link

Press

The Triangle Right indicator lights on the display. Playback starts.

NOTE

Do not place any foreign objects in the disc tray. Doing so could damage the unit.

Do not push the disc tray in by hand when the power is turned off. Doing so could damage the unit.

Operation buttons	Function
Operation buttons	Function
	Playback / Pause
	Stop
	Skip to previous track / Skip to next track
	(Press and hold) Fast-reverse / Fast-forward
0 - 9	Select the track
	Random playback
	Repeat playback Switching between All-track repeat and Single-track repeat.
INFO	Time display switching Switching between elapsed time of the current track, remaining time of the current track and remaining time of all tracks. Text information recorded on the Super Audio CD appears in the display.
OPTION	Switching the playback layer of the Super Audio CD

Switching the display

Press INFO.

Displays text and time information stored on media.

The text information is only displayed for Super Audio CD.

Any characters that cannot be displayed are replaced with “.” (period).

Discs that can be played back

See Playing back Discslink.

Playing a specific track (Direct searching)

Use 0 – 9 to select the tracks.

Bracket Open Example Bracket Close

Track 4 :

Press number 4 to select track 4.

Track 12 :

Press numbers 1 and 2 consecutively to select track 12.

The number you enter is set about 1.5 seconds after you press the number buttons. To enter a two-digit number, be sure to press the two number buttons, one immediately after the other.