Distances

Set distance from listening position to speakers.

Measure beforehand the distance from the listening position to each speaker.

When using Dirac Live, the unit is fixed as “msec”.

“Distances” values for each filter are stored independently in Dirac Live Room Correction.

Unit

Set the unit of distance.


Feet
Meters

[When using Dirac Live]


msec

Step

Set the minimum variable width of the distance.


1 ft / 0.1 ft
0.1 m / 0.01 m

[When using Dirac Live]


1 ms / 0.1 ms

Set the distance


0.0 ft – 59.1 ft / 0.00 m – 18.00 m

[When using Dirac Live]


0.0 ms – 20.0 ms

The speakers that can be selected differ depending on the “Speaker Layout” settings. link

Default settings:
Front L / Front R / Front Height L / Front Height R / Center / Front Dolby L / Front Dolby R / Subwoofer 1 / Subwoofer 2 / Subwoofer 3 / Subwoofer 4: 11.8 ft (3.60 m)
Speakers other than the above: 9.8 ft (3.00 m)

Set the difference in the distance between the speakers to less than 19.7 ft (6.00 m).

Dolby Speaker Setup

Set the distance between the Dolby Atmos Enabled speaker and the ceiling.


3.0 ft - 10.8 ft / 0.90 m - 3.30 m (Default: 5.9 ft / 1.80 m)

This can be set when “Front Dolby”, “Surround Dolby” or “Back Dolby” is used in “Speaker Layout”. link

Cannot be set when Dirac Live are being used.

Set Defaults

The “Distances” settings are returned to the default settings.