Update Speaker Setup menu

Manual Setup

Manual Setup
Speaker Layout

Amp Assign
Front/Center/Surround/Surround Back
Height Speakers
Layout
Front Layout / Middle Layout / Rear Layout / TS/CH
Subwoofers
Subwoofer Mode
Subwoofer Layout
Bi-Amp
Front B
ZONE2
ZONE3
ZONE2/3
View Terminal Config.
Distances
Levels
Crossovers
Speaker Preset
Advanced
Subwoofer Output
Low Pass Filter
Distribution
Front Speaker
2ch Playback
Tactile Transducer

Changes to the Audyssey Setup initial setting screen

Changes to the Audyssey Setup initial setting screen

Amp Assign

Select the power amplifier usage method to match your speaker system.

You need to configure the detailed settings for the speaker configuration in accordance with the selected mode. Select Amp Assign configure the corresponding detailed settings.

11.1ch:

Setting to use the 9-channel power amplifier in this unit and an external power amplifier connected to PRE OUT to play back up to 11.1-channels.

You can connect speakers for up to 11.1-channels for MAIN ZONE.

9.1ch:

Settings to assign all power amplifier within this unit to MAIN ZONE to play back up to 9.1-channels.

You can connect speakers for up to 11.1-channels for MAIN ZONE.

Speakers to output audio are automatically switched for playing back up to 9.1-channels in accordance with the input signal and sound mode.

7.1ch + ZONE2:

Setting to assign the power amplifiers in this unit for ZONE2 to 2-channels.

You can connect speakers for up to 9.1-channels for MAIN ZONE.

Speakers to output audio are automatically switched for playing back up to 7.1-channels in accordance with the input signal and sound mode.

7.1ch + ZONE3:

Setting to assign the power amplifiers in this unit for ZONE3 to 2-channels

You can connect speakers for up to 9.1-channels for MAIN ZONE.

Speakers to output audio are automatically switched for playing back up to 7.1-channels in accordance with the input signal and sound mode.

5.1ch + ZONE2/3:

Setting to assign the power amplifiers within this unit for ZONE2 and ZONE3 each to two different channel.

7.1ch + ZONE2/3-MONO:

Setting to assign the power amplifiers in this unit for ZONE2 and ZONE3 each to a different channel.

You can connect speakers for up to 9.1-channels for MAIN ZONE.

Speakers to output audio are automatically switched for playing back up to 7.1-channels in accordance with the input signal and sound mode.

7.1ch (Bi-Amp):

Setting to assign the power amplifiers in this unit for front speaker bi-amp connection to 2-channels.

You can connect speakers for up to 9.1-channels for MAIN ZONE.

Speakers to output audio are automatically switched for playing back up to 7.1-channels in accordance with the input signal and sound mode.

5.1ch (Bi-Amp) + ZONE2:

Setting to assign the power amplifiers in this unit for front speaker bi-amp connection to 2-channels.

Setting to assign the power amplifiers in this unit for ZONE2 to 2-channels.

7.1ch + Front B:

Setting to assign the power amplifiers within this unit for connecting the second set of front speakers.

You can switch between the desired combination of front speakers A and front speakers B.

Switch the front speaker using the “Front Speaker” setting. link

You can connect speakers for up to 9.1-channels for MAIN ZONE.

Speakers to output audio are automatically switched for playing back up to 7.1-channels in accordance with the input signal and sound mode.

Preamplifier:

All of the speakers are connected using an external power amplifier and this unit is used as a preamplifier.

back to top