Speaker configuration and “Amp Assign” settings

This system configuration plays back 13-channels. You can create speaker systems such as a bi-amp connection by changing the “Amp Assign” settings.

Perform “Amp Assign” settings to suit the speaker configuration to be installed. link

Playback speaker in MAIN ZONE

“Amp Assign” settings

Connection page

5.1-channel playback

13.1ch (Default)

7.1-channel playback

13.1ch (Default)

9.1-channel playback

13.1ch (Default)

13.1-channel playback

13.1ch (Default)

13.1-channel playback (Dolby Atmos and Auro-3D)

13.1ch (Default)

11.1-channel playback (bi-amp connection of front speakers)

11.1ch (Bi-Amp)

11.1-channel playback + second pair of front speakers

11.1ch + Front B

The sound mode that can be selected varies according to the speaker configuration. See “Sound modes and channel output” link for the sound modes that are supported.

The following pages provide basic connection examples.

Refer to the example connection for Example connection for the Auro-3D 9.1-channel systemlink when playing Auro-3D with a 9.1-channel system using the basic 5.1-channel system and the front height and surround height speakers.
Also refer to the connection example for Example connection for the Auro-3D 13.1-channel systemlink when playing Auro-3D with a 13.1-channel system by adding the Surround Back, Top Surround and Center Height speakers.

In addition to the connections described in p.link - link, this unit allows for various speaker connections with the “Amp Assign” setting.

Also refer to the menu screen in “View Terminal Config.” on the “Amp Assign” setting screen, which shows how to make connections in your environment.

GUI ViewTerminalConfig A85

back to top