Overview

Connections

Connecting an amplifier

Connecting to a device with digital audio input connectors

Connecting a USB memory device to the USB port

Connecting devices with remote control connectors

Connecting the timer device

Connecting the power cord

Playback

Basic operation

Turning the power on

Switching the power to standby

Selecting the playback media mode

Switching the display’s brightness

Playing CDs

Playing tracks in a specific order (Program playback)

Playing DATA CDs

Playing files

Playing a USB memory device

Playing files stored on USB memory devices

Settings

Tips

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Sound is interrupted or noise occurs

Desired sound does not come out

USB memory devices cannot be played back

Cannot playback Discs

Appendix

Playing back Discs

Files

Playing back a USB memory devices

Playback order of music files

About discs and files

Cautions on using media

Trademark information

Connecting devices with remote control connectors

When you use this unit connected to a Marantz amplifier, this unit receives operation signals sent from the amplifier and operates accordingly.

Next, configure the “Connection” and “Setting”.

Connection

Use the supplied remote connector cable to connect the REMOTE CONTROL IN connector of this unit to REMOTE CONTROL OUT connector of the amplifier.

Setting

Turn the EXTERNAL/INTERNAL switch on the unit to “EXTERNAL”.

This setting will disable remote sensor reception of this unit.

To operate the unit, point the remote control at the remote sensor of the amplifier.

To use this unit by itself without connecting an amplifier, turn the switch to “INTERNAL”.