Overview

Inserting the batteries

Operating range of the remote control unit

Part names and functions

Remote control unit

Connections

Connecting an amplifier

Connecting to a device with digital audio input connectors

Connecting a USB memory device to the USB port

Connecting devices with remote control connectors

Connecting the timer device

Connecting the power cord

Playback

Basic operation

Turning the power on

Switching the power to standby

Selecting the playback media mode

Switching the display’s brightness

Playing tracks in a specific order (Program playback)

Playing DATA CDs

Playing a USB memory device

Playing files stored on USB memory devices

Settings

Tips

Troubleshooting

Power does not turn on / Power is turned off

Operations cannot be performed through the remote control unit

Display on this unit shows nothing

No sound comes out

Sound is interrupted or noise occurs

Desired sound does not come out

USB memory devices cannot be played back

Cannot playback Discs

Appendix

Playing back Discs

Playing back a USB memory devices

Playback order of music files

About discs and files

Cautions on using media

How to handle media

Explanation of terms

Trademark information

Dimensions / Weight

Power does not turn on / Power is turned off

Power is not turned on.

Check whether the power plug is correctly inserted into the power outlet. link

This unit is in standby mode. Press the POWER Power Button button on the remote control. link

Power automatically turns off.

The auto standby mode setting is on. The auto standby mode automatically switches the unit to standby if there are no operations for more than 30 minutes. To disable the Auto Standby mode, set “Auto-Standby” on the menu to “Off”. link

The power turns off and the power indicator shows one long blink and three short blinks in red.

The protection circuit has been activated due to an error in the internal power supply. Unplug and reinsert the power cord, then press the Power Button button to turn on the power again. If the problem is not solved by turning the power off and on again, unplug the power cord and contact our customer service center.