Search result
Distances
Set distance from listening position to speakers.
Measure beforehand the distance from the listening position to each speaker.
When using Dirac Live, the unit is fixed as msec.
“Distances” values for each filter are stored independently in Dirac Live Room Correction.
Unit
Set the unit of distance.
|
Feet(Default) |
|
Meters |
[When using Dirac Live]
|
msec |
Step
Set the minimum variable width of the distance.
|
1 ft / 0.1 ft (Default: 1 ft) |
|
0.1 m / 0.01 m |
[When using Dirac Live]
|
1 ms / 0.1 ms |
Set the distance
|
0.0 ft – 59.1 ft / 0.00 m – 18.00 m |
[When using Dirac Live]
|
0.0 ms – 20.0 ms |
The speakers that can be selected differ depending on the “Speaker Layout” settings. link
Default settings:
Front L / Front R / Front Height L / Front Height R / Center / Front Wide L / Front Wide R / Front Dolby L / Front Dolby R / Subwoofer 1 / Subwoofer 2 / Subwoofer 3 / Subwoofer 4: 11.8 ft (3.60 m)
Speakers other than the above: 9.8 ft (3.00 m)
Set the difference in the distance between the speakers to less than 19.7 ft (6.00 m).
Dolby Speaker Setup
Set the distance between the Dolby Atmos Enabled speaker and the ceiling.
|
3.0 ft - 10.8 ft / 0.90 m - 3.30 m (Default: 5.9 ft / 1.80 m) |
Set Defaults
The “Distances” settings are returned to the default settings.