Search result
Speaker Layout
Select the Left/Right speaker output terminals, whether or not there is a subwoofer, and the low range playback capacity.
Left/Right
Set the Left/Right speaker output terminals.
Configuration
The Left/Right speakers are fixed at “Yes” because they are required for playback.
Yes(Default) |
|
Connection
Select the Left/Right speaker output terminals.
Spkr + Pre-out |
Speaker and pre-out outputs are active. |
Pre-out Only: |
Only pre-out terminals are active. Interference to the preamplifier can be reduced by turning off the signal path to the power amplifier. |
Subwoofer
Set the presence of a subwoofer.
Yes |
Use a subwoofer. |
No: |
Select when a subwoofer is not connected. |
Low Pass Filter
Set the low pass filter of the subwoofer channel.
40 Hz / 60 Hz / 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz / 150 Hz / |
This item cannot be set when “Subwoofer” is set to “No”.