Overview

Part names and functions

Connections

Speaker installation

Connecting speakers

Connecting a TV

Connecting a playback device

Connecting a USB memory device to the USB port

Connecting to a home network (LAN)

Connecting an external control device

Connecting the power cord

Settings

Audyssey® Setup

Operating external devices with the remote control unit

Operating learning function

Setting the back light

Specifying the zone used with the remote control unit

Tips

Troubleshooting

Resetting factory settings

Resetting network settings

Restoring the firmware to the factory defaults

Appendix

Video conversion function

Playing back a USB memory devices

Playing back a Bluetooth device

Playing back a file saved on a PC or NAS

Playing back Internet Radio

Personal memory plus function

Last function memory

Explanation of terms

Trademark information

Dimensions / Weight

Manual Setup

Perform when setting the speakers manually or when changing settings made in Audyssey_® Setup.

If you enable new speakers in the speaker configuration menu after performing Audyssey_® Setup, you will no longer be able to select Audyssey MultEQ_® XT32, Audyssey Dynamic EQ_® or Audyssey Dynamic Volume_®. link

Changing the following settings:
Speaker size (Large or Small) / Distances / Levels / Crossovers settings will not disable Audyssey_® or require running Audyssey_® Setup again.

“Manual Setup” can be used without changing the settings. Please set if necessary.