Search result
Specifications
|
RMS Power output (Simultaneous drive of both channels) : |
200 W x 2 (8 Ω/ohms load, 1 kHz, T.H.D. 0.05 %) |
|
400 W x 2 (4 Ω/ohms load, 1 kHz, T.H.D. 0.1 %) |
|
|
Total harmonic distortion |
0.005 % |
|
Frequency response (CD, 1 W, 8 Ω/ohms load) : |
5 Hz – 50 kHz ±3 dB |
|
Damping factor (8 Ω/ohms load, 20 Hz – 20 kHz) : |
500 |
|
Input sensitivity/Input impedance |
|
|
PHONO (MC Low) : |
280 μV/10 Ω/ohms |
|
PHONO (MC High) : |
280 μV/49 Ω/ohms |
|
PHONO (MM) : |
2.6 mV/47 kΩ/kohms |
|
BALANCED : |
880 mV/40 kΩ/kohms |
|
CD/LINE/RECORDER : |
440 mV/20 kΩ/kohms |
|
POWER AMP : |
1.5 V/20 kΩ/kohms |
|
Maximum allowable PHONO input level (1 kHz) |
|
|
MC : |
8 mV |
|
MM : |
80 mV |
|
RIAA deviation (20 Hz – 20 kHz) : |
±0.5 dB |
|
S/N (IHF-A, 8 Ω/ohms load) |
|
|
PHONO (MC) : |
76 dB (0.5 mV Input, 1 W Output) |
|
PHONO (MM) : |
88 dB (5 mV Input, 1 W Output) |
|
BALANCED : |
111 dB (4 V Input, Rated output) |
|
CD/LINE/RECORDER : |
111 dB (2 V Input, Rated output) |
|
Power requirement : |
AC 120 V, 60 Hz |
|
Power consumption : |
270 W |
|
Power consumption in standby mode : |
0.3 W |
For the purpose of improvement, the specifications and design are subject to change without notice.