Search result
HDMI Setup
Make settings for HDMI Audio Out, HDMI Pass Through and HDMI Control settings.
NOTE
When “HDMI PassThrough” and “HDMI Control” is set to “On”, it consumes more standby power. (HDMI PassThroughlink, HDMI Controllink) If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet.
HDMI Audio Out
Select HDMI audio output device.
|
AVR |
Play back through speakers connected to the unit. |
|
TV: |
Play back through TV connected to the unit. |
When the HDMI Control function is activated, priority is given to the TV audio setting. link
When the power of this unit is on and “HDMI Audio Out” is set to “TV”, audio is output as 2-channel from the HDMI OUT connector.
HDMI PassThrough
Selects how this unit will transmit HDMI signals to the HDMI output in standby power mode.
|
On |
Transmits the selected HDMI input through this unit’s HDMI output when this unit is in standby power mode. |
|
Off: |
No HDMI signals are transmitted through this unit’s HDMI output in standby power mode. |
Pass Source
Sets the HDMI connector that inputs HDMI signals when in standby.
|
Last: |
The most recently used input source will go into standby mode. |
|
CBL/SAT / |
Pass through the selected input source. |
“Pass Source” can be set when “HDMI PassThrough” is set to “On” or “HDMI Control” is set to “On”. (HDMI PassThroughlink, HDMI Controllink)
RC Select
Set whether to allow this unit to be turned on by the input source select button on the remote control when this unit is on standby.
|
Power On+Source |
The power of this unit is turned on and the input source changes. |
|
Source Only: |
The HDMI input source changes while this unit is on standby. The power display of this unit blinks when the input source select button of the remote control is pressed. |
“RC Select” can be set when “HDMI Control” is set to “On” or “HDMI PassThrough” is set to “On”. (HDMI PassThroughlink, HDMI Controllink)
HDMI Control
You can link operations with devices connected to HDMI and compatible with HDMI Control.
|
On: |
Use HDMI Control function. |
|
Off |
Do not use HDMI Control function. |
Please consult the operating instructions for each connected device to check the settings.
Refer to “HDMI Control function” for more information about the HDMI Control function. link
NOTE
If the “HDMI Control” settings have been changed, always reset the power to connected devices after the change.
ARC
On the TV connected to the HDMI MONITOR connector, set whether to receive sound from the TV via HDMI.
|
On: |
Use ARC function. |
|
Off |
Do not use ARC function. |
You can adjust the volume of this unit using the TV remote control.
If using this function, use a TV compatible with ARC (Audio Return Channel) and enable the HDMI Control function of the TV.
When “HDMI Control” is set to “On”, the “ARC” settings automatically switch “On”. link
NOTE
If the “ARC” settings have been changed, always reset the power to connected devices after the change.
Using an eARC function-compatible television enables audio playback from the speaker connected to this unit, regardless of “ARC” settings in the menu.
TV Audio Switching
Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends an appropriate CEC control command to this unit.
|
On |
Select the “TV Audio” input automatically when receiving a command from the TV. |
|
Off: |
Do not select the “TV Audio” input automatically when receiving a command from the TV. |
“TV Audio Switching” can be set when “HDMI Control” is set to “On”. link
Pow.Off Control
Links the power standby of this unit to external devices.
|
All |
If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby. |
|
Video: |
With an input source being selected that is assigned either “HDMI” or “VIDEO”, when you turn the power of the TV off, power to this unit is automatically set to standby. link |
|
Off: |
This unit does not link with power to a TV. |
“Pow.Off Control” can be set when “HDMI Control” is set to “On”. link
Power Saving
If “TV Speaker” is set as the audio output setting of your TV, this unit is automatically set to standby mode to reduce power consumption.
This function is activated in the following cases.
When “TV Audio” is selected as the input source of this unit
When playing content from a device connected by HDMI
|
On: |
Use Power Saving function. |
|
Off |
Do not use Power Saving function. |
“Power Saving” can be set when “HDMI Control” is set to “On”. link
Smart Menu
This function can be used to configure the settings of this unit, select an input source and set Tuner and Internet Radio stations using the TV remote control.
|
On: |
Use Smart Menu function. |
|
Off: |
Do not use Smart Menu function. |
“Smart Menu” can be set when “HDMI Control” is set to “On”. link
NOTE
If the “Smart Menu” settings have been changed, always reset the power to connected devices after the change.
The Smart Menu function may not work properly depending on the specifications of your TV. In this case, set “Smart Menu” to “Off”.