Overview

Connections

Connecting speakers

Connecting a TV

Connecting a playback device

Connecting an iPod or USB memory device to the USB port

Connecting an FM/AM antenna

Connecting to a home network (LAN)

Connecting an external control device

Connecting the power cord

Playback

Basic operation

Playing an iPod

Playing a USB memory device

Listening to music on a Bluetooth device

Listening to FM/AM broadcasts

Listening to Internet Radio

Playing back files stored on a PC and NAS

AirPlay function

Spotify Connect function

Convenience functions

Selecting a sound mode

HDMI control function

Smart Menu function

Sleep timer function

Smart select function

Settings

Tips

Resetting factory settings

Appendix

About HDMI

Playing back a USB memory devices

Playing back a Bluetooth device

Playing back a file saved on a PC or NAS

Playing back Internet Radio

Personal memory plus function

Last function memory

Sound modes and channel output

Sound modes and surround parameters

Types of input signals, and corresponding sound modes

Explanation of terms

Trademark information

Manual EQ

Uses the graphic equalizer to adjust the tone of each speaker.

Speakers for which “Manual EQ” can be set differ according to the sound mode.

This can be set when the “MultEQ_®” setting is “Off”. link

This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.

If you are using headphones, you can set the equalizer for headphones. link

Manual EQ

Set whether to use the graphic equalizer or not.


On:	Use the graphic equalizer.
Off (Default):	Do not use the graphic equalizer.

When using headphones

Headphone EQ

Set whether to use the graphic equalizer for headphones or not.


On:	Use the graphic equalizer for headphones.
Off (Default):	Do not use the graphic equalizer for headphones.

Speaker Select

Select whether to adjust tones for individual speakers or for all speakers.


All:	Adjust all speaker tones together.
Left/Right (Default) :	Adjust the left and right speaker tones together.
Each:	Adjust the tone for each speaker.

Adjust EQ

Adjust tonal balance for each frequency band.

Select the speaker.

Select the adjustment frequency band.

63 Hz / 125 Hz / 250 Hz / 500 Hz / 1 kHz / 2 kHz / 4 kHz / 8 kHz / 16 kHz

Adjust the level.

–20.0 dB – +6.0 dB (Default : 0.0 dB)

Curve Copy

Copy the Flat correction curve created in the Audyssey_® Setup.

“Curve Copy” is displayed after Audyssey_® Setup has been performed.

“Curve Copy” cannot be used when using headphones.

Set Defaults

The “Manual EQ” settings are returned to the default settings.