For menu operations, see the following page.
By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences.

Setting items	Detailed items		Description	Page
Quick Setup	–		Performs the network settings using a Wizard style window. For details on the operations, see the separate “Quick Start Guide”.	–
General	Audio Out		You can set whether to “Fixed” or “Variable” the analog audio output level.	link
	Volume Limit		This sets the maximum analog audio output level that can be used when the analog audio output setting is set to variable.	link
	Language		Sets the language for display the menu.	link
	Auto-Standby		Sets the unit power to standby when the unit is not in use.	link
	Firmware		Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications.	link
		Update	Update the firmware of this unit.	link
		Notifications	Set the Update, Upgrade and Alerts notification on/off.	link
		Add New Feature	Display new features that can be downloaded to this unit and perform an upgrade.	link
Network	Network Information		Displays various information about the network.	link
	Network Control		Performs the on/off settings for the network function when in standby mode.	link
	Friendly Name		Edits a name displayed on the Internet.	link
	Settings		Make settings for wired LAN connection.	link
		DHCP (On) or DHCP (Off)	Performs the DHCP setting.	link
		IP Address∗	Performs the IP address setting.	link
		Subnet Mask∗	Performs the subnet mask setting.	link
		Gateway∗	Performs the gateway setting.	link
		Primary DNS∗	Performs the primary DNS setting.	link
		Secondary DNS∗	Performs the secondary DNS setting.	link
		Proxy	Performs the proxy setting.	link
		Test Connection	Used to check the network connection.	link