Search result
Tips
Simple operations in the power off state
When a input source select buttons, 
/ 
button, FAVORITES CALL button or 
button is pressed, the operation is performed at the same time as the unit switches on. (Basic operationlink, Playing CDslink, Favorite functionlink)
When the “Network Control” is set to “On”, you can perform playback, or other operations through AirPlay, “Marantz Hi-Fi Remote”. link
Simple operations for iPod/USB
When connected to the Front USB port, the Input Source automatically changes and playback begins. (Listening to music on an iPodlink, Playing files stored on USB memory deviceslink)
I only want to recharge my iPod
Connect the iPod to this unit when the unit power is on. Then turn the unit power off, and the iPod will continue to charge until fully charged. link
When connected to the Rear USB port, the iPod can be charged without the current Input Source changing.
Specifying the iPod track with the alarm function
Connect the iPod to this unit by USB and then press the MODE button to register your favorite tracks in the favorites using “On-Display” mode.link Then set a track registered in the favorites as the alarm.link
When using alarm playback on an iPod touch or iPhone, set the iPod touch or iPhone to “Sleep” mode. If the power is switched off using the power off operation, alarm playback cannot be used.
Specifying the desired track with the alarm function
After registering the desired track in NAS, etc., register the track in the favorites and then specify the track in the alarm settings. link
Change to the DST (Daylight Saving Time)
Select “General” - “Clock” in the setup menu and configure the settings. link
Changing or resetting the network environment
Prepare the provided “Quick Setup Guide”, and run Setup – “Quick Setup”. For detailed settings, run Setup - “Network” - Settings. link
Volume adjustment is difficult when using AirPlay or app operation, and the sound suddenly becomes too loud
Reducing the “Volume Limit” setting value (to around 20 to 30) limits the volume setting from AirPlay or an app to an ideal range and makes it easier to adjust the volume. link
I want to set the optimized listening environment after changing the configuration/position of the speakers or changing a speaker to a new one
Select Setup – “General” – “Speaker Configuration” – “Response” and configure the settings. link